Loading ...
Loading ...
Loading ...
Complete Installation
1, Check to be sure all parts are now
installed. If there is an extra part, go
back through the steps to see which
step was skipped.
2. Check to be sure you have all of
your tools.
3. Dispose of all packaging materials.
4. Check the dryer's final location. Be
sure the vent is not crushed or
kinked.
5, Check to be sure the dryer is level.
(See "Level Dryer.")
6, Plug into a grounded outlet. Turn
power on,
7, Remove the blue protective film on
the console and any tape remaining
on the dryer.
8. Read "Operating Your Dryer."
9, Wipe the dryer drum interior
thoroughly with a damp cloth to
remove any dust,
10. Set the dryer on a full heat cycle (not
the Air cycle) for 20 minutes, Open
the dryer door after five minutes and
feel for heat, If you do not feel heat,
turn the dryer off and wait five
minutes.
Then check the following:
• Controls are set in a running or "On"
position.
• Start button has been pushed firmly.
Repeat 5-minute test as outlined above.
If dryer still does not operate properly,
check the following:
• Dryer is plugged into a grounded outlet.
• Electrical supply is connected.
• House fuse is intact and tight; or circuit
breaker has not tripped.
• Dryer door is closed.
• If dryer makes an unusual noise, check
that dryer is level.
• You may notice a burning odor. This
odor is common when the heating
element is first used. The odor will go
away.
19
Loading ...
Loading ...
Loading ...