Loading ...
Loading ...
Loading ...
7
Warranty Safety CleaningOperation Installation Service Parts
1. Plan where and how the ductwork will be located.
Install proper-sized ductwork, transition(s), elbow(s), and roof or wall cap. For best results, use a minimum number
of transitions and elbows. Use 2’’ metal foil duct tape to seal duct joints.
The minimum hood distance above cooktop must not be less than 24’’. A maximum of 30’’ above cooktop is
highly recommended for best capture of cooking impurities.
Distances over 30’’ are at the installer and users discretion.
INSTALL DUCTWORK
INSTALLATION WITH
RECTANGULAR DUCT
Hood
3¼” x 10” duct
Roof cap
Wall
cap
HH0056A
24” minimum above
cooking surface
Hood
Roof cap
Wall
cap
HH0057A
24” minimum above
cooking surface
6” OR 7”
round duct
Transition
3¼” x 10” to 6” OR
3¼” x 10” to 7”
INSTALLATION WITH
ROUND DUCT
PREPARE THE HOOD LOCATION
1. If the bottom of the cabinet is recessed, attach three
1” wide wood strips (not included), as shown beside, in
order to properly attach the hood to the cabinet. The
wood strips must be as thick as the recess.
HD0026A
CABINET BOTTOM
1¾”1¾”
10⅛’’
1”
1”
1”
2. Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction or discharge
chosen. See fi gures below.
C
L
HD0162A
3½”
5¼”
2¾”
B
1½” dia.
A
5/16”
5¼”
7/8”
C
L
3/4”
4”
5¼” 5¼”
2”
HD0163A
A
CABINET BOTTOM
1½”
2”
1½”
B
HORIZONTAL DISCHARGE
VERTICAL DISCHARGE
Loading ...
Loading ...
Loading ...