Loading ...
Loading ...
Safety information _3
circuits, which could cause a fire hazard from
overheated wires.
• If the wall socket is loose, do not insert the
power plug.
- There is a risk of electric shock of fire.
• Do not use a cord that shows cracks or
abrasion damage along its length or at either
end.
• Do not bend the power cord excessively or
place heavy articles on it.
- Do not pull or excessively bend the power
cord.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
- When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This may result in an electric shock or fire.
• This appliance should be positioned in such a
way that it is accessible to the power plug.
- Failing to do so may result in an electric shock
or fire due to electric leakage.
• Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
• Do not attempt to repair, disassemble, or
modify the appliance yourself.
- Do not use any fuse(such as cooper, steel
wire, etc.) other than the standard fuse.
- hen repairing or reinstalling the appliance is
required, contact your nearest service center.
- Failing to do so may result in an electric shock,
fire, problems with the product, or injury.
• To get the best energy eciency of this
product, please leave all selves, drawers and
baskets on their original position like as above
illustration.
• Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause a short-circuit,
fire and/or electric shock.
• Do not use aerosols near the refrigerator.
- Aerosols used near the refrigerator may cause
an explosion or fire.
• Do not install this appliance near a heater,
inflammable material.
• Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
• Do not install this appliance in a location where
gas may leak.
- This may result in an electric shock or fire.
• This refrigerator must be properly
installed and located in accordance
with the manual before you use it.
• Connect the power plug in the proper position
with the cord hanging down.
- If you connect the power plug upside down,
the wire can get cut o and cause a fire or
electric shock.
• When moving the refrigerator, be careful not to
roll over or damage the power cord.
- This constitutes a fire hazard.
• Make sure that the power plug is not
squashed or damaged by the back of the
refrigerator.
• Keep the packing materials out of reach of
children.
- There is a risk of death from suocation if a
child puts the packing materials on his or her
head.
• The appliance must be positioned so that the
plug is accessible after installation.
• You need to remove all the protective plastic
film before you initially plug the product in.
• The refrigerator must be safely
grounded.
- Always make sure that you have grounded the
refrigerator before attempting to investigate
or repair any part of the appliance. Power
leakages can cause severe electric shock.
• Never use gas pipes, telephone lines or other
potential lightning attractors as an electrical
ground.
- Improper use of the grounding plug can result
in a risk of electric shock. If it is necessary
to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating
of the extension cord should be AC115-
120 V, 10 A, or more. If a grounding adapter
is used, make sure the receptacle box is fully
grounded.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.
• The wall socket must be easily accessible so
that the appliance can be quickly disconnected
from the wall socket in an emergency.
• It must be outside the area of the rear of the
appliance.
DA68-02601A-16.indb 3 2018. 10. 8. 오후 4:31
Loading ...
Loading ...
Loading ...