Loading ...
Loading ...
Loading ...
16_ operating
Operating your French Door
Refrigerator
USING THE CONTROL PANEL
8
7
1
2
3
5
6
4
( 1 ) Energy
Saver
Hold 3 sec for
ºC ↔ ºF
Touching this button turns Energy Saver
mode on and o. When you turn Energy
Saver on, the Energy Saver icon lights.
Turn Energy Saver o and the icon
goes o. The Energy Saver function
automatically turns on when power is
supplied to the refrigerator.
If condensation or water drops appear
on the doors, turn the Energy Saver
mode o.
Touch and hold this button for 3
seconds to switch the temperature
units between °C and °F.
( 2 ) Freezer
(Hold 3 sec
for Power
Freeze)
Touch this button to set the freezer to
your desired temperature.
You can set the temperature between
-8°F and 5°F (between -23°C and
-15°C). Touch and hold this button for
3 seconds to decrease the time needed
to freeze products in the Freezer. It
can be helpful if you need to quickly
freeze easily spoiled items or if the
temperature in the freezer has warmed
dramatically (For example, if the door
was left open).
( 3 ) Ice
Type/Water
Hold 3 sec for
Filter Reset
Touch this button to select the ice or
water function. You can select water or
the types of ice(cubed/crushed ice).
Each time you press the button, the
cubed and crushed ice modes alternate
and the Cubed or Crushed ice icon
lights up, indicating your selection.
After you replace the water filter, touch
and hold this button for 3 seconds to
reset the water filter life indicator.
( 4 ) Alarm
Hold 3 sec
for Lighting
To turn the door open alarm on and o
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes. The beeping
stops when you close the door. The door
alarm function is preset to On int the
factory You can turn it o by touching and
then releasing this button. You can turn
it back on in the same fashion. The icon
lights up when the function is on.
If you touch and hold the Alarm/Lighting
button for 3 seconds, the dispenser LED
Lamp will stay on. To turn o the light
press the button for 3 seconds again.
( 5 ) Fridge
Hold 3 sec for
Power Cool
Touch this button to set the fridge to your
desired temperature. You can set the
temperature between 34°F and 44°F
(between 1°C and 7°C ). Touch and hold
this button for 3 seconds to decrease
the time needed to cool products in the
Refrigerator. It can be helpful if you need
to quickly cool easily spoiled items or if
the temperature in the fridge has warmed
dramatically (For example, if the door was
left open).
( 6 ) Ice O
Hold 3 sec for
Child Lock
If you don’t want to make more ice, touch
the Ice O button. Touching this button
for 3 seconds turns on Child Lock which
locks the display panel and dispenser
buttons so the buttons can not be used.
The Child Lock icon lights up to indicate
you’ve activated the Child Lock function.
Press 3 seconds to unlock. The Child
Lock are not going to lock the Cool
Pantry. The lights and motors start until
the refrigerator turns o again.
( 7 ) Ice O
If you don’t want to make more ice, touch
the Ice O button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you to stop ice
making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is
ON, and the water Line is not
connected, there will be a water
valve noise from the back of the
unit, press the Ice O (Hold 3sec
for child lock) button for less
than 3 seconds until the Ice O
Indicator ( ) illuminates.
(RF263T**)
(RF263B/N**)
DA68-02601A-16.indb 16 2018. 10. 8. 오후 4:32
Loading ...
Loading ...
Loading ...