Loading ...
Loading ...
Loading ...
operating _17
02 OPERATING
( 8 ) Filter
Water filter usage
This icon will light up when you need
to change the filter. After you use
about 300 gallons of water, the filter
indicator lights up. (about 6 months).
The icon will blink red for several
seconds when you open or close
the door. After you install the new
water filter, reset the filter indicator by
touching the Ice Type/Water Hold 3
sec for Filter Reset button.
• If water is not dispensing or
dispensing slowly, you need to
replace the water filter because
the water filter is clogged.
• Some areas have large
amounts of lime in their water,
which causes the water filter to
clog more quickly.
Cooling O
Mode
Cooling O mode (also called Shop
mode), is designed for use by retailers
when they are displaying refrigerators
on the shop floor. In Cooling O
mode, the refrigerator’s fan motor
and lights work normally, but the
compressor does not run, and the
refrigerator and freezer do not get
cold. To start Cooling O mode, touch
and hold the Energy Saver button
and the Freezer button for 5 seconds
during normal operation.
The refrigerator chime sounds and the
temperature display flashes OF OF.
To cancel Cooling O mode, touch
and hold the Energy Saver and the
Freezer buttons again for 5 seconds.
CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands
of water filters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of
a generic water filter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change
your water filter cartridge.
To give you time to get a new filter,
the red light comes on just before
the capacity of the current filter
runs out.
(Red)
Changing the filter on time provides you with the
freshest, cleanest water from your refrigerator.
1. Shut o the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
WARNING
2
1
• To change the water filter more easily,
shut o the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having diculties, grip the
water filter firmly and pull it hard.
• When you pull the
water filter, a little
water can leak from
the opening. This is
normal.
3
2
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow, empty the water filter tray
( 3 ) and dry around the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until
it locks.
• If you have trouble inserting the water
filter because of high water pressure,
shut o the water supply valve.
• The locked symbol should be lined up with the
indicator line.
4
5. Touch and “Ice Type/
Water Hold 3 sec for
Filter Reset” button
(
(Filter Reset)
) for about
3 seconds to reset the
water filter. The color
of the indicator ( )
changes from red to
light o.
6. If you turned o the water supply, turn it back on.
• For a replacement water filter, you can
visit your local home Improvement
center or contact the Samsung Parts
distributor.
• Be sure the replacement water filter has the
SAMSUNG logo on the box and on the water
filter. Link : http://www. samsungparts.com
DA68-02601A-16.indb 17 2018. 10. 8. 오후 4:32
Loading ...
Loading ...
Loading ...