Loading ...
Loading ...
Loading ...
Operating the appliance en
29
Zeolith drying ¼
Zeo l i t h dr yi ng
:Warning
Risk of burns from touching the blow
opening 1R!
Never touch the blow opening. The blow
opening becomes hot and, furthermore,
any damage will result in a chargeable
callout by customer service.
Caution!
Please ensure that the intake opening
1J is not obstructed and do not place
any temperature-sensitive utensils in the
lower basket at the rear right side above
the blow opening 1R.
The appliance features a Zeolith
container. Zeolith is a mineral which can
store moisture and heat energy
and release them again.
During the washing step this heat
energy is used to dry the mineral
and heat up the rinsing water.
During the drying phase moisture from
the rinsing compartment is stored in
the mineral and heat energy
is released. This released heat energy is
blown into the rinsing compartment with
dry air. This accelerates and improves
drying.
These processes therefore save a great
deal of energy.
Remaining running time
display
When the programme is selected, the
remaining programme time is indicated
in the display window )".
*After the programme has started, the
remaining running time is displayed on
the floor (only for settings Timelight
†:‹‚ and †:‹ƒ).
The running time is determined during
the programme by the water
temperature, the quantity of dishes as
well as the degree of soiling and may
vary (depending on the selected
programme).
* depending on the features of your
dishwasher
Sensor setting
In its automatic programmes the
appliance uses sensors to optimise
their operation. The sensors adjust the
strength of the automatic programmes
according to the amount and type of
soiling. You can choose from three
levels of sensitivity for the sensors.
Sensor setting †“:‹‹: This setting is
ideal for a mixed load and heavily soiled
utensils, but it also saves energy and
water.
Sensor setting †“:‹‚: This setting
adjusts the programme strength for the
effective removal of food remnants,
even if the amount of soiling is low. The
energy and water consumption is
adjusted accordingly.
Sensor setting †“:‹ƒ: This setting
adjusts the programme strength for
difficult conditions of use, for example
firmly dried on food remnants. This
setting is recommended if you are using
biological or eco detergents which
contain smaller quantities of active
agents. The energy and water
consumption is adjusted accordingly.
Loading ...
Loading ...
Loading ...