Loading ...
Loading ...
Loading ...
en Operating the appliance
28
1 Operating the
appliance
Oper at i ng the appl i anc e
Programme data
The programme data (consumption
values) can be found in the quick
reference guide. They refer to normal
conditions and the set water hardness
value •:‹…. Different influencing factors
such as water temperature or line
pressure may result in deviations.
Opening the door
To open the door, press the upper
middle part of the door. The appliance
opens automatically.
If you have activated the child-proof
lock, press twice in quick succession at
the top of the door in the middle.
Changing the settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory settings.
Here’s how to change the settings:
1. Switch on ON/OFF switch (.
2. Press and hold the ‹ button
for 3 seconds.
In the display window )" you will
see •:‹... and ‘ .
3. Press the ‹ button to access
the individual settings.
4. Adjust the setting using the buttons -
and + P.
5. Press and hold the ‹ button
for 3 seconds.
The chosen setting has now been
stored in your dishwasher.
Tip: If you want to change a number of
settings, first make all your changes one
after another. Then press the ‹
button for 3 seconds. All the settings
will then be stored in the dishwasher.
AquaSensor *
AquaSens or
* depending on the features of your
dishwasher
The Aqua sensor is an optical
measuring device (light barrier) which
measures the turbidity of the rinsing
water.
The AquaSensor is used according
to the programme. If the AquaSensor is
active, “clean” rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
3–6 litres. If the turbidity is greater,
the water is drained and is replaced
with fresh water. In the automatic
programmes the temperature
and running time can also be adjusted
to the degree of soiling.
Loading ...
Loading ...
Loading ...