Loading ...
Loading ...
Loading ...
7
As Needed Cleaning
1. Roll lint off the screen with your fingers.
2. W
et both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub lint
screen with the brush to remove residue buildup.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Replace screen in
dryer.
Cleaning the Dryer Interior
1. Apply a liquid, nonflammable household cleaner to the stained
area of the drum and rub with a soft cloth until stain is removed.
2. Wi
pe drum thoroughly with a damp cloth.
3. T
umble a load of clean cloths or towels to dry the drum.
NOTE: Garmen
ts that contain unstable dyes, such as denim blue
jeans or brightly colored cotton items, may discolor the dryer interior.
These stains are not harmful to your dryer and will not stain future
loads of clothes. Dry unstable dye items inside out to avoid transfer
of dye.
Removing Accumulated Lint
From Inside the Dryer Cabinet
Lint should be removed every 2 years, or more often, depending on
dryer usage. Cleaning should be done by a qualified person.
From Inside the Exhaust Vent
Lint should be removed every 2 years, or more often, depending on
dryer usage.
Vacation and Moving Care
Vacation care
Operate your dryer only when you are at home. If you will be on
vacation or not using your dryer for an extended period of time, you
should:
1. U
nplug dryer or disconnect power.
2. If yo
u have a gas dryer, close shutoff valve in gas supply line.
3. Clean lin
t screen. See “Cleaning the Lint Screen.”
Moving care - Electric Dryers
For power supply cord-connected dryers:
1. Unplug the power supply cord.
2. Make sur
e leveling legs are secure in dryer base.
3. Us
e masking tape to secure dryer door.
For direct-wired dryers:
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Disconnect wiring.
3. Make su
re leveling legs are secure in dryer base.
4. Use mas
king tape to secure dryer door.
Moving care - Gas Dryers
1. Unplug the power supply cord.
2. Cl
ose shutoff valve in gas supply line.
3. Disco
nnect gas supply line pipe and remove fittings attached to
dryer pipe.
4. Cap the
open fuel supply line.
5. Make su
re leveling legs are secure in dryer base.
6. Use masking tape to secure dryer door.
Changing the Drum Light
1. Unplug dryer or disconnect power.
2. Open
the dryer door. Locate the light bulb cover on the back wall
of the dryer. Remove the screw located in the lower right-hand
corner of the cover. Remove the cover.
3. Turn bulb counterclockwise. Replace the bulb with a 10-watt
appliance bulb only. Replace the cover and secure with the screw.
4. Pl
ug in dryer or reconnect power.
Loading ...
Loading ...
Loading ...