Loading ...
Loading ...
Loading ...
6
Drying Rack Option
Use the Drying Rack to dry items such as sweaters and pillows
without tumbling. The drum turns, but the drying rack does not
move.
I
f your model does not have a drying rack, you may be able to
purchase one for your model. To find out whether your model allows
drying rack usage and for information on ordering, please refer to the
front page of the manual or contact the dealer from whom you
purchased your dryer.
NOTE: The drying rack must be removed for normal tumbling. Do
not use the automatic cycle with the drying rack.
To use the drying rack
1. Place drying rack in dryer.
Style 1: Y
our drying rack has front legs. Slide rear pegs into the
dimples on the back wall of the dryer. Lower the front legs to rest
on the dryer opening.
Style 2: Y
our drying rack does not have front legs. Do not
remove the lint screen. Slide drying rack over the bottom of the
dryer door opening. Push down to secure drying rack on frame.
2. Pu
t wet items on top of drying rack, leaving space between items.
Do not allow items to hang over the edge of the drying rack. Close
the door.
3. Se
lect a timed drying cycle and temperature, or an air cycle. Items
containing foam, rubber, or plastic must be dried on a clothesline
or by using an air cycle. Refer to the following table.
4. Start the dryer
. Reset cycle to complete drying, if needed.
Rack Dry Cycle Temp
Time
Washable wool items (block
to shape, lay flat on drying
rack)
Timed
Drying
Low 60 min.
Stuffed toys/pillows (cotton
or polyest
er filled)
Timed
Drying
Low 60 min.
Stuffed toys/pillows
Foam rubber filled
Air
(no heat)
N/A 90 min.
DRYER CARE
Cleaning the Dryer Location
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
Cleaning the Lint Screen
Clean lint screen before each load. A screen blocked by lint can
increase drying time.
IMPORTANT:
■ Do not run the dryer with the lint screen loose, damaged,
blocked or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
■ If lint falls off the screen into the dryer during removal, check the
exhaust hood and remove the lint.
Every Load Cleaning
Style 1:
1. The lint screen is located on top of the dryer. Pull the lint screen
toward you. Roll lint off the screen with your fingers. Do not rinse
or wash screen to remove lint. Wet lint is hard to remove.
2. Push the lint screen firmly back into place.
Style 2:
1. The lint scr
een is located in the door of the dryer. Pull the lint
screen straight up. Roll lint off the screen with your fingers. Do not
rinse or wash screen to remove lint. Wet lint is hard to remove.
2. Push the lint screen firmly back into place.
Loading ...
Loading ...
Loading ...