DIR-878 User Manual

Loading ...

58D-Link DIR-878 User Manual

Section 3 - Conguration

Virtual Server

Enter a Name for the new rule or select an application from the

drop-down menu.

Enter the IP address of the computer on your local network that

you want to allow the incoming service to. Or, select the Computer

Name from the drop-down menu.

Select the protocol of the trac to allow or deny (TCP, UDP, Both,

or Other).

If you selected Other, enter the Protocol Number.

Enter the public port you want to open.

Enter the private port you want to open.

Use the drop-down menu to select a schedule when the rule will

be enabled. The schedule may be set to Always Enable, or create

your own schedule from the Schedules section (refer to page 66).

Click Apply when you are done.

The DIR-878 can store a maximum of 15 rules. If you wish to remove a rule, click on

its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil

icon in the Edit column. If you wish to create a new rule, click the Add Rule button.

Click Save when you are done.

When you click on Add Rule, the Create New Rule window will open. Enter the required

information into the elds described below:

Name:

Local IP:

Protocol:

Protocol

Number:

External Port:

Internal Port:

Schedule:

The Virtual Server allows you to specify a single public port for redirection to an internal LAN IP Address and Private LAN port.

From the Port Forwarding page click Virtual Server.

Loading ...

User Manual - Page 62