Loading ...
Loading ...
Loading ...
28D-Link DIR-878 User Manual
Section 3 - Conguration
Enter the Username provided by your ISP.
Enter the Password provided by your ISP.
Select either Always on, On demand, or Manual.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the IP Address provided by your ISP (Static IP only).
Enter the ISP Service Name (optional).
Enter the Primary DNS Server IP address assigned by your ISP.
Enter the Secondary DNS Server IP address assigned by your ISP.
Maximum Transmission Unit - by default this eld will be set to Auto.
Select Manual if you need to change the MTU for optimal performance.
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can use drop-down menu to replace the
Internet port’s MAC address with the MAC address of a connected client.
Click Save when you are done.
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
Address Mode:
IP Address:
Service Name:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
MAC Address
Clone:
Select PPPoE (Point to Point Protocol over Ethernet) if your Internet connection requires you to enter a username and password. This information
can be provided by your Internet service provider (ISP). This option is typically used for DSL services.
PPPoE
Loading ...
Loading ...
Loading ...