Loading ...
Loading ...
Loading ...
Surface Cooking
Use Proper Cookware
Cookware shouUd have
fiat bottoms that make
good contact with the
entire surface heating
eUement. Check for
flatness by rotating a
ruUeracross the
bottom of the
cookware (See Figure
2). Be sure to follow
the recommendations
for using cookware as
shown in Figure 1.
Figure 2
Note: The size and type of cookware
used wHUinfluence the setting needed
for best cooking resuRs.
Using Woks
CORRECT
W
t t
o Fiat bottom and straight
sides.
Tight fitting Hds.
o Weight of handUedoes not tilt
pan. Pan is well baUanced.
o Pan sizes match the amount
of food to be prepared and the
size of the surface eUement.
o Made of materiaU that conducts
heat well.
o Easy to dean.
AUways match pot diameter to
eUement surface diameter.
mNCORRECT
W
Curved and warped pan
bottoms.
W
o Pan overhangs unit by more
than one-haft inch.
41 I_
Pan is smaller than the
element.
Heavy handle tilts the pan.
Figure 1
For ceramic glass cooktop models,
use only flat bottomed woks
(without support rings).
DO NOT use a wok if
it is equipped with a metal ring that
extends beyond the surface ele-
ment. Because this ring traps heat,
the surface element and cooktop
surface could be damaged.
Wire trivets : Do not use wire triv-
ets, Cookware bottoms must be in
direct contact with the surface
cooking areas.
DO NOT use two
surface cooking areas to heat one
large pan such as a roaster or
griddle. If the pan boils dry, the bot-
tom surface of the pan could dam-
age the glass ceramic cooktop,
cause discoloring or crazing of a
_orcelain enamel surface, and
damage surface heating elements
and drip pans.
i_ ΒΈΒΈ _ ....
Loading ...
Loading ...
Loading ...