Loading ...
Loading ...
Loading ...
29
4 Permanent settings in programming mode
U
‘Switch-on rinse’
U
‘Manual’: The switch-on rinse must be started manually.
U
‘Automatic’: The switch-on rinse is started automatically.
Example: Proceed as follows to specify that the switch-on rinse
should be started manually.
Precondition:
‘Please select product’ is displayed.
O T Press the P button.
‘Maintenance status’ (‘1/7’)
g T Turn the Rotary Switch until
‘Maintenance settings’ (‘6/7’) is
displayed.
T Press the
‘Switch-on rinse’ button.
‘Switch-on rinse’
T Press the ‘Manual’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
O T Press the P button to exit programming mode.
‘Please select product’
E If you are using the CLARIS Blue filter cartridge and have acti-
vated it, it is not possible to set the water hardness.
The harder the water is, the more frequently the F9 needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
Precondition:
‘Please select product’ is displayed.
O T Press the P button.
‘Maintenance status’ (‘1/7’)
g T Turn the Rotary Switch until
‘Maintenance settings’ (‘6/7’) is
displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
g T Turn the Rotary Switch to adjust the water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings’
Setting the water
hardness
Loading ...
Loading ...
Loading ...