Loading ...
Loading ...
Loading ...
24
4 Permanent settings in programming mode
In the programme item ‘Product settings’ (‘3/7’) you can make the
following settings:
U
‘Expert mode’
U
Set individual settings for all speciality coffees, milk and hot
water (see Chapter 4 ‘Permanent settings in programming
mode – Adjusting the product settings’).
U
Replace the products on the start screen with your favour-
ites (see Chapter 4 ‘Permanent settings in programming
mode – Replacing products on the start screen’).
U
Change the names of individual products (see Chapter 4
‘Permanent settings in programming mode – Renaming a
product’).
U
‘Factory setting’
U
Reset the set values for individual products to their factory
setting.
In the programme item
‘Product settings’ (‘3/7’) / ‘Expert mode’ you
can make individual settings for all speciality coffees and hot water.
The following permanent settings can be made:
Product Coffee strength Amount More settings
Ristretto,
Espresso,
Coffee,
Special coffee
8 levels Amount of coffee:
25ml–240ml
Temperature
(normal, high),
Product name
2 ristretti,
2 espressi,
2 coffees
– Amount of coffee: The amount
set for the single product is
doubled.
Temperature (as for
single product),
Product name
Cappuccino,
Latte macchiato,
Espresso
macchiato,
Caffè latte,
Flat white
8 levels Amount of coffee:
25ml–240ml
Milk foam: 0sec.–120sec.
Interval: 0sec.–120sec. (not
for caffè latte and flat white)
Temperature
(normal, high),
Product name
Portion of milk
foam
– Milk foam: 0sec.–120sec. Product name
Hot water – Water: 25ml–450ml Temperature (low,
normal, high),
Product name
Product settings
Adjusting the product
settings
Loading ...
Loading ...
Loading ...