Loading ...
Loading ...
Loading ...
Reversing the door
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side, if .
Warning! When reversing the door, the
appliance must not be connected to
the mains. Ensure that the plug is
removed from the mains socket..
Tools you will need
required
8mm socket wrench
Cross-shaped screwdriver
8mm wrench
Thin-blade screwdriver
Note:
in order to
gain access to the base, you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
1. Stand the refrigerator upright. Open
the upper door to take out all door
racks (to avoid racks damaged) and
then close the door.
When required the refrigerator
can be tilted backwards
Door racks
2. part ① on top of the
refrigerator body from right side and
then part ③ and part ④ on
the upper door in the same way.
Remove
remove
③Upper cover of upper door
②Upper hinge cover (right)
①Upper cover
④Corner cover
3. Disconnect electrical connector①
as well as electrical connector② and
then part③. remove
1 2
3
3
2
1
Note: Please hold the upper door by
hand during step 4 to prevent door
dropping.
4. Remove the screws ① , loose
wire②, and remove par③.
Special flange self-tapping
screws
Earth wire
①
②
③
part
8
part ② and put it back to
the plastic bag.
Remove in
Hisense Refrigerator
Loading ...
Loading ...
Loading ...