Loading ...
Loading ...
Loading ...
Lower hinge part (left)
Note: washer may
stick to lower door.
Washer
12. the lower door and adjust its
position to
upper hinge axis. Turn the middle hinge
by 180, change the washer on the to
the upper side, adjust the middle hinge
to the appropriate position and then
install it.
Fit
pin
locate the door onto the
13. Screw out The upper hinge , turn
the upper hinge over and fix on it.
Then place .
pin
pin
to one side for use later
14. Exchange wires both in the left and
right slots of refrigerator body.
15. Move the upper door to appropriate
position, adjust part① and upper door,
Move the connecting wire② in the slot
of upper door from right to left， and
then fix part①and wire② by screws③.
(Please hold upper door by hand when
installing)
16. Connect electrical connector① in
accordance with step 3 and then install
part②(which is in the plastic bag).
②upper hinge co ve r(left)
①
17.Reverse part① by 180°and install it
onto the right corner of upper door，
then mount part②. (both of which
in step 2)
were
removed
18. Take the reed switch out of the
coping block(part③ 6 in step 3)and
mount it on (which
is “R” in the plastic bag). Put
the coping block just removed back
to the plastic bag.
the additional block
marked
in
10
Hisense Refrigerator
Loading ...
Loading ...
Loading ...