Loading ...
Loading ...
Loading ...
23
Assembly Instructions
Installation:
❑ The worktop must already have a cutout
for the built-in hob (see built-in hob
installation instructions).
❑ The switchbox must be installed before
the hob.
1. Cut an opening in the wooden front
(max. 88
+2
mm x 525
+2
mm).
(For cutout dimensions of worktop, see
installation instructions for hob).
2. Prior to installation:
❑ Mark the centre of the cutout.
❑ Align the support with the notch and
screw on flush with the front edge of the
facia.
3. Insert appliance:
❑ Push the appliance in carefully so that
no cables can become caught.
Important when disassembling:
❑ Deenergize the appliance. Undo the
earthed conductor from the earthing
screw.
❑ Remove hob or intermediate base and
push out the switchbox from the back.
4. Check functioning.
❑ If the appliance is properly installed, it
should be covered on all sides in such a
way that it is absolutely impossible to
come into contact with even functionally
insulated parts. It should only be
possible to remove the cover with the
help of tools.
43
88
+2
525
+2
567
195
100
max. R 8
Loading ...
Loading ...
Loading ...