Loading ...
Loading ...
Loading ...
21
Assembly Instructions
For the fitter and kitchen
specialist
Important::
❑ Packaging must be disposed of
responsibly.
❑ The appliance may only be connected
and started up by an authorized
specialist.
❑ For connection, power supply cable
H05VV-F must be used.
❑ Rated consumption:
Max. 8 kW.
❑ Rated voltage: 220 – 230 V~.
❑ Appliance type no.: see rating plate.
❑ The connection diagram and rating plate
are fitted to the top cover of the
appliance.
❑ Electrical safety of the appliance is only
assured if the house installation
protective conductor system has been
properly installed.
❑ An isolating device must be provided
locally.
Switches with a contact gap of over 3
mm are considered isolating devices.
These include circuit-breakers, fuses
and contactors.
❑ The appliance must always be isolated
for repairs.
Connectable built-in hobs
❑ Cooking surface and appliance must be
from the same manufacturer and
marked with a point on the instructions
sticker. Otherwise functional failures will
result. They must have the same rated
voltage (see nameplate).
Furniture ranges
Built-in cooker units from any kitchen range
can be used for the switchbox. The
veneers or plastic coating of the units in
question must have been processed using
heat-resistant adhesive (90° C). If plastic
coating or adhesive is insufficiently
temperature-resistant, the coating may
deform or loosen.
In line with the test regulations on heating,
the appliance corresponds to Type Y.
~
380-400V2N
~
220-230V
~
380-400V3N
L1
N
L2
L3
N
N
L3
123 4
5
5
5
4
4
3
32
21
1
L1
L1
Loading ...
Loading ...
Loading ...