Owner's Manual - Page 170

For 2017 WRX.

Loading ...
Loading ...
Loading ...
& Turn signal indicator
lights
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to Replacing bulbs F11-44.
& High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
& Cruise control indica-
tor
This indicator appears when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to To set cruise control F7-52.
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illumi-
nates, the cruise control indicator
flashes at the same time. At this
time, avoid driving at high speed
and have your vehicle inspected at a
SUBARU dealer as soon as possi-
ble.
& Cruise control set in-
dicator
This indicator appears when vehicle
speed has been set to use the cruise
control function. Refer to To set cruise
control F7-52.
& Automatic headlight
beam leveler warning
light (models with LED
headlights)
This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the ON
position, have your vehicle inspected at
your SUBARU dealer.
& Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
& Headlight indicator
light
This indicator light illuminates under the
following conditions.
. when the light switch is turned to the
or position
. when the light control switch is in the
AUTO position and the headlights illumi-
nate automatically
& Drivers control center differ-
ential auto indicator (STI)
This indicator functions while the ignition
switch is ON . When it appears, it
indicates that the drivers control center
differential is set to the auto mode. It
disappears when the driver s control
center differential is set to the manual
Instruments and controls/Warning and indicator lights
CONTINUED
3-35
Loading ...
Loading ...
Loading ...