Loading ...
Loading ...
Loading ...
Instruments and controls/Warning and indicator lights
Inside warning
chime
Outside warning
chime
Operation indicator
on push-button igni-
tion switch
Status Action
Ding,
ding ...
(intermittent)
——
The driver’s door was opened while the
push-button ignition switch is “ACC” (in
CVT models, when the select lever is in
the “P” position.)
Switch the push-button ignition switch to
“OFF”, or close the driver’s door.
*When exiting the vehicle, be sure to
switch the push-button ignition switch to
“OFF”.
The push-button ignition switch was
switched to “OFF” while the driver’s door
is open.
Close the driver’s door.
Ding
Short beep
(2 seconds)
—
Lockout warning:
All doors were closed after the locking of
all doors was set by using the door lock
lever or power door locking switch while
the access key is inside the vehicle.
Take out the access key from the
vehicle, and lock the doors.
*The doors cannot be locked while the
access key is inside the vehicle.
*A chirp sound will be heard, and all
doors will be unlocked.
—
Short beep
(2 seconds)
—
Trunk lockout warning:
The trunk was closed with the access
key in it while all doors are locked (or
during the automatic lock time period).
Take out the access key from the trunk,
and close the trunk.
*By pressing the trunk lid opener button
after this warning chime sounds, the
trunk can be unlocked.
Access key lock-in warning:
The door lock sensor was touched while
the push-button ignition switch is “OFF”
and the access key is inside the vehicle.
Take out the access key from the
vehicle, and lock the doors.
*If the access key is inside the vehicle,
the doors cannot be locked.
—
Beep, beep ...
(5 beeps)
—
Door ajar warning:
The door lock sensor is touched while
the push-button ignition switch is in the
“OFF” position and another door or the
trunk is opened.
Close the doors securely and lock them.
*If
one of the doors is opened, the doors
cannot be locked.
3-30
Loading ...
Loading ...
Loading ...