Loading ...
Loading ...
Loading ...
200
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
While winding the
bobbin, the
bobbin thread was
wound below the
bobbin winder
seat.
You have not wound the bobbin
thread properly.
After removing the thread wound
below the bobbin winder seat, wind
the bobbin correctly.
page 193
Bobbin thread
does not wind
neatly on the
bobbin.
The thread is not passed through
the bobbin-winding thread guide
correctly.
Correctly pass the thread through the
bobbin-winding thread guide.
page 27
Bobbin spins slowly.
Move the sewing speed controller to
the right (so that the speed will be
fast).
page 28
The thread that was pulled out
was not wound onto the bobbin
correctly.
Wind the thread that was pulled off
round the bobbin five or six times
clockwise.
page 28
Fabric being sewn
with the machine
cannot be
removed.
Thread is tangled below the
needle plate.
Lift up the fabric and cut the threads
below it, and clean the race.
page 190
The fabric feeds in
the opposite
direction.
The feed mechanism is damaged.
Contact your dealer or the nearest
authorized service center.
–
The upper thread
has tightened up.
The bobbin thread is incorrectly
installed.
Correctly install the bobbin thread.
page 29,
page 186
The thread is
tangled on the
wrong side of the
fabric.
You have not threaded the upper
thread properly.
Correct the upper threading.
page 32,
page 187
Symptom Probable Cause Remedy Reference
Loading ...
Loading ...
Loading ...