User Manual - Page 16

For PPR776S. Also, The document are for others Westinghouse models: POR663, PORS L/R, POR667, POR668, POR783, POR788, PPR776  PGR657, PGR659, PXR688, PXR698, PDR790, PDR794 

Loading ...
Loading ...
Loading ...
30 31
CATALYIC LINERSCATALYIC LINERS
Re-assembling top door trim
• Takeholdofthetopdoortrimateachsideandpositionit
to the inside edge of the glass�
• Pushthetrimdownwithitstopedgeoverglasspaneluntil
the clip snaps in on each side of the trim�
• Pushthemiddleofthetrimdowntoensureitisstraight
and firm against the glass panel�
Fitting the oven door
• Takeholdoftheovendoorwithahandoneachsideand
with the door at an angle of 45º, position the recesses at
the bottom of the door onto the hinge arms of the oven�
Let the door slide down the hinge arms as far as it will go�
• Openthedoorfullytoaccessthehingesthenrotate
the ‘stirrups’ (highlighted in the image) on both hinges
back to their original positions� The oven door may now
be closed�
Removing side open door top trim
• Takeholdofthegridembossedsectionsofthedoortrim
at each end and press inwards to release the clips� Then
remove the door trim by lifting it upwards�
Removing side open door glass panel
warning
Rough handling, especially around the edges can cause the
glass to break�
• Takeholdoftheblackborderedglasspanelwithahand
on its upper and lower edge� Lift and rotate the glass
around the retainer to remove it from the guide�
• Takeholdofthesmallerclearglasspanel(whentted)
with a hand on its upper and lower edge� Lift the glass to
remove it from the retainer
• Therubbermouldingsontheuppercornersofthesmaller
clear glass panel may be removed� Don’t misplace them�
Cleaning door glass panels
warning
Do not to use harsh abrasives on the glass panes as the
reectivesurfaceplaysaroleinthefunctionoftheoven.
Do not place glass in dishwasher� Hand wash only with a
soft cloth and warm soapy water� When dry polish with a
soft cloth and ensure the glass is dry before reassembly
Re-assembling door glass panels
• Ensuretherubbermouldingsareontheuppercornersof
the smaller clear glass panel�
• Insertthesmallerglasspanel(whentted)rstfromabove
and at an angle to the profile of the door
• Repeatfortheblackborderedglasspanelensuringthe
painted surface is facing toward the door
Replacing top door trim
• Takeholdofthetopdoortrimateachsideandpositionit
to the inside edge of the glass�
• Pushthetrimdownwithitstopedgeoverglasspaneluntil
the clip snaps in on each side of the trim�
Loading ...
Loading ...
Loading ...