Loading ...
Loading ...
Loading ...
26 27
CATALYIC LINERSCLEANING
releasing the grill element
We have designed the upper element with a hanger clip to
help you reach your oven roof for cleaning�
Retaining wire models
• Liftelementupcarefully.
• Pullhangercliptotheleftorrighttounhookit.The
element will drop down freely�
Rotating latch models
• Rotatelatch180º.Theelementwilldropdownfreely.
Removing the side racks (shelf supports)
• Grasptheshelfsupportsatthefront.
• Pullthemrmlyinwards.
• Toinstalltheshelfsupports,seepage7.
Removing and replacing the oven light and side
light (where fitted)
• Turnovenlightglassanticlockwisetoremoveitforglobe
replacement�
• Aspecialhightemperatureresistantglobeshouldbe
used� This can be purchased from the Customer Care
Centre�
• Toremovesidelight,placeaspoonunderthelightglass
and lever off� Replace globe and snap glass cover back
into position�
warning
Make sure the appliance is turned off before
you remove or replace parts, to avoid the
possibility of electric shock.
Removing and replacing the catalytic fan baffle
(where fitted)
• Removethe2retainingscrewsonthetopedgeofthe
fanbafe.
• Pullthetopedgetowardsyouandthendisengageto
bottom tabs from the oven back�
important
• Insertthetwotabsatthebottomofthefanbafeintotheir
corresponding slots in the oven back�
• Pushthetophomeandinsertscrewsrmlyinto
appropriate holes�
• Thefanbafemustnotbeloose.
catalytic liners
Some models come with Catalytic liners� These models
contain:
• 2Catalyticsideliners(tobettedbyyou)
• 1Catalyticfancover(alreadytted)
operation
The catalytic liners are coated with a specially formulated
enamel coating, over a base of regular enamel� This enamel
coating has a rough surface which is also porous� During
normal cooking, fats and other food spatter is partially
absorbed into the surface and then oxidised away�
This oxidisation of the fat works best if the oven is set at high
temperatures.Ifyoudoalotoflowertemperaturebaking,
say around the normal 180ºC, then the cleaning process
may not be complete� Every now and then you should turn
the oven on to 260ºC for around one hour to completely
remove the soil�
cleaning
Should the panels become heavily soiled, they will need to
be taken out of the oven and cleaned by hand� They should
be soaked in warm, soapy water for at least 2 hours and
then wiped clean with a soft cloth�
Removing the catalytic liners
• RemoveSideRacks(seepage24).
• Liftthelineruptodisengagethehooks.
• Thelinersshouldnowbefreetobepulledintowardsthe
centre of the oven�
•Refertopage7forre-installingyoursideliners.
Loading ...
Loading ...
Loading ...