Loading ...
Loading ...
Loading ...
42 / EN
Washing Machine /User’s Manual
Troubleshooting
Problem Reason Solution
Foam is overflowing
from the detergent
drawer.
Too much detergent is used.
Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
Put detergent into the machine
suitable for the programmes and
maximum loads indicated in the
“Programme and consumption table”.
When you use additional chemicals
(stain removers, bleachs and etc),
reduce the amount of detergent.
Laundry remains
wet at the end of the
programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might
have been activated due to too much
detergent usage.
Use recommended amount of
detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed
in the drum to prevent any damage to the machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 6.2
A
CAUTION: If you cannot eliminate the problem although you follow the
instructions in this section, consult your dealer or the Authorized Service Agent.
Never try to repair a nonfunctional product yourself.
Loading ...
Loading ...