Loading ...
Loading ...
Loading ...
1 Safety precautions
5
1.7 Using for the first time
The appliance must be in-
stalled and connected to the
electricity supply by a quali-
fied fitter/electrician in ac-
cordance with the separate
installation instructions.
Before operating the newly installed appli-
ance for the first time, the following steps
should be taken:
Before using for the first time
▸ Switch on the power and turn on the
water tap.
▸ Set (see page 23) the water hardness.
▸ Fill the salt reservoir with approximately
1.0l water and 1 kg regeneration salt.
Wipe away any excess salt on the edge
of the salt reservoir.
▸ Fill the rinse agent reservoir with rinse
agent.
▸ Run the programme without dishes
to protect the appliance from corrosion
from any excess salt and to remove
traces of grease left behind from the
manufacturing process.
The refill indicator can flash during the
first few wash cycles. goes out when the
salt concentration in the reservoir is evenly
distributed.
1.8 Notes on using the
operating instructions
Graphical operating instructions can be
downloaded on the internet from
www.vzug.ch.
Symbols used
Denotes important safety
precautions.
Failure to observe said precautions can
result in injury or in damage to the appli-
ance or fittings!
Validity
The product family (model number) corres-
ponds to the first alphanumerics on the
identification plate. These operating in-
structions apply to:
Model Type Product range
Adora
60 N
(EURO
60)
GS60NZVi 41075
Variations depending on the model are
noted in the text.
Modifications
Text, diagrams and data correspond to the
technical standard of the appliance at the
time these operating instructions went to
press. The right to make technical modific-
ations for the purpose of the further devel-
opment of the appliances is reserved.
Loading ...
Loading ...
Loading ...