Loading ...
Loading ...
Loading ...
6 Care and maintenance
6.3 Cleaning the filter system
Only use soft materials for cleaning beneath the filter system. Never use
metal objects.
An incorrectly assembled filter system can cause the appliance to mal-
function.
▸ Open the appliance door and pull out the lower basket.
2
1
3
1
▸ Release the filter system in fine filter
1
in an anti-clockwise
direction and remove.
▸ Open the coarse filer
2
by pressing on closing lug
3
and
clean the filter system under running water using a brush.
▸ Remove any coarse debris.
▸ Replace the filter system and turn the fine filter
1
as far as it
will go in a clockwise direction.
6.4 Refilling with regeneration salt
Never put detergent in the salt reservoir.
When the supply of regeneration salt is exhausted, the refill indicator flashes.
▸ Open the appliance door and remove the lower basket.
▸ Open the cover on the salt reservoir by lifting up the grip.
▸ Fill with 1 kg standard regeneration salt. During the initial set-
up, add an additional 1 l water.
▸ Wipe away any excess salt on the edge of the salt reservoir.
▸ Close the cover and engage the latch.
▸ Run the «Pre-rinsing» programme without dishes to protect the
appliance from corrosion from any excess salt.
Approximate consumption of regeneration salt
A
= Hardness of the water supply
B
= Number of rinsing cycles per kg salt
A °fH
0–5 6–10 11–15 16–20 21–25 26–30 31–40 41–50 51–70 71–120
°dH
0–3 4–6 7–9 10–12 13–14 15–16 17–22 23–27 28–38 39–65
B
∞ 680 360 250 150 125 90 60 40 20
26
Loading ...
Loading ...
Loading ...