WM3090CW OWNER'S MANUAL

Loading ...

15INSTALLATION

ENGLISH

Connecting to the Power

Supply

The washer should be plugged into a 120-VAC, 60

Hz grounded 3-prong outlet. Plug in the washer.

WARNING

x Do not use a worn or damaged power cord or

power plug. Replace or repair it immediately.

)DLOXUHWRGRVRPD\UHVXOWLQGHDWK¿UHHOHFWULF

shock, or malfunction.

x Do not modify the power cord and plug provided

with the appliance. Take care not to damage it

when installing or moving the washer. Failure to

GRVRPD\UHVXOWLQGHDWK¿UHHOHFWULFVKRFNRU

malfunction.

x Make sure that the washer is grounded.

x Connect this washer to a grounded outlet

conforming to the rating prior to use. Failure

WRGRVRPD\UHVXOWLQ¿UHHOHFWULFVKRFNRU

malfunction.

x Do not damage or cut off the ground prong of

WKHSRZHUFRUG'RLQJVRPD\FDXVHGHDWK¿UH

electric shock, or product malfunction.

x Improper connection of the equipment-grounding

conductor can result in risk of electric shock.

&KHFNZLWKDTXDOL¿HGHOHFWULFLDQRUVHUYLFH

technician if you are in doubt as to whether the

DSSOLDQFHLVSURSHUO\JURXQGHG,ILWGRHVQRW¿W

the outlet, have a proper outlet installed by a

TXDOL¿HGHOHFWULFLDQ

x The appliance and outlet must be positioned so

that the plug is easily accessible.

x Do not use adapters or extension cords. Doing

VRPD\UHVXOWLQVHULRXVLQMXU\¿UHHOHFWULF

shock, or death.

x For best performance, plug the washer into

its own individual outlet. This helps prevent

overloading house wiring circuits which could

FDXVHD¿UHKD]DUGIURPRYHUKHDWHGZLUHV

x If necessary, use a new, UL-listed 3-prong

adapter or 3-wire extension cord with a 3-prong

(grounding) plug rated at no less than the branch

circuit. Do not use an extension cord longer

than 3 feet. Failure to follow these warnings may

UHVXOWLQVHULRXVLQMXU\¿UHHOHFWULFVKRFNRU

death.

Testing the Washer

Check if the washer is properly installed and run a

test cycle.

Load the washer with 6 pounds of laundry

(approximately 6 thick bath towels).

Press the Power button.

Press the Rinse+Spin button.

Press the Start/Pause button.

The wash cycle starts.

Check if water is supplied, that the machine does

not rock or vibrate excessively, and that it drains

well during the spin cycle.

NOTE

x If water leaks during water supply, see Connecting

the Water Lines to connect them properly.

x If the washer rocks and vibrates excessively, see

Leveling the Washer to level it again.

x If the drain does not work, see Connecting the Drain

Hose to install the hose properly.

Loading ...

OWNER'S MANUAL - Page 16