Loading ...
Loading ...
Loading ...
448
6-3. Do-it-yourself maintenance
TACOMA_OM_USA_OM04025U_20MY
n After a fuse is replaced
l If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (→P. 449)
l If the replaced fuse blows again, have the vehicle inspected by your Toyota
dealer.
n If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
n To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
l Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
l Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
l Do not modify the fuses or fuse boxes.
NOTICE
n Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
Loading ...
Loading ...
Loading ...