Loading ...
Loading ...
Loading ...
281
4-5. Using the driving support systems
4
Driving
TACOMA_OM_USA_OM04025U_20MY
n Cruise control can be set when
l Vehicles with an automatic transmission: The shift lever is in D or range 4 or
higher of S has been selected.
l Vehicle speed is above approximately 25 mph (40 km/h).
n Accelerating after setting the vehicle speed
l The vehicle can be accelerated normally. After acceleration, the set speed
resumes.
l Even without canceling the cruise control, the set speed can be increased
by first accelerating the vehicle to the desired speed and then pushing the
lever down to set the new speed.
n Automatic cruise control cancellation
Cruise control will stop maintaining the vehicle speed in any of the following
situations.
l Actual vehicle speed falls more than approximately 10 mph (16 km/h) below
the preset vehicle speed.
At this time, the memorized set speed is not retained.
l Actual vehicle speed is below approximately 25 mph (40 km/h).
l VSC is activated.
l TRAC is activated for a period a time.
l When the VSC or TRAC system is turned off.
l 4WD models: The operation cannot be switched for 5 seconds or more after
operating the front-wheel drive control switch.
n If “Cruise Control Malfunction Visit Your Dealer” is displayed on the
multi-information display
Press the “ON-OFF” button once to deactivate the system, and then press
the button again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels imme-
diately after being activated, there may be a malfunction in the cruise control
system. Have the vehicle inspected by your Toyota dealer.
Loading ...
Loading ...
Loading ...