Loading ...
Loading ...
Loading ...
||
WHEELS AND TIRES
314
5. Drive the vehicle at a speed above 20 mph
(30 km/h) continuously for at least
10 minutes.
> Calibration is done automatically once ini-
tiated by the driver and the system does
not provide confirmation when calibration
is completed.
After adjusting inflation pressure, repeat steps
1-5 above.
Related information
•
Tire Pressure Monitoring System (TPMS) –
general information (p. 312)
•
Tire Pressure Monitoring System (TPMS) –
messages (p. 314)
•
Tire Pressure Monitoring System (TPMS) –
activating/deactivating (p. 314)
•
Tire Pressure Monitoring System (TPMS) –
changing wheels (p. 312)
•
My Car – introduction (p. 79)
Tire Pressure Monitoring System
(TPMS) – activating/deactivating
Activating/deactivating TPMS
(Canadian models only)
1. Switch off the engine.
2.
Put the ignition in mode I or II (see Ignition
modes (p. 82) for additional information).
3.
Press the MY CAR key in the center console
control panel and select
Settings Car
settings
Tire pressure
4.
Select
Tire monitoring and press OK/
MENU to turn the system on or off.
Related information
•
Tire Pressure Monitoring System (TPMS) –
general information (p. 312)
Tire Pressure Monitoring System
(TPMS) – messages
Erasing warning messages
When a low tire pressure warning message has
been displayed and the tire pressure warning
light in the instrument panell (
) has come
on:
1. Use a tire pressure gauge to check the infla-
tion pressure of all four tires.
2. Re-inflate the tire(s) to the correct pressure
(consult the tire pressure decal on the driv-
er's door opening).
3. In certain cases, it may be necessary to drive
the vehicle for several minutes at a speed of
20 mph (30 km/h) or faster. This will erase
the warning text and the telltale will go out.
Loading ...
Loading ...
Loading ...