Loading ...
Loading ...
Loading ...
||
LOADING AND STORAGE
150
3. Press both sides of the cover until they click
into place
. The red mark will no longer be
visible.
4. Check that both ends of the cover are
securely locked in place.
Removing the cover
1. Press one of the end pieces of the cover
inward.
2. Pull the cover carefully upward and outward.
The other end will release automatically from
its retaining bracket.
Folding down the cargo area cover's
rear flap
The cargo area cover's rear flap points horizon-
tally when the cover is retracted (rolled up). To
fold it down:
–
Pull the flap slightly rearward past its sup-
ports and fold it down.
NOTE
On models equipped with this cover, it should
be removed before a child seat is attached to
the child restraint anchors.
Related information
•
Loading – general (p. 146)
Steel cargo grid
Your vehicle can be equipped with a steel grid
that helps prevent objects in the cargo area from
moving forward into the passenger compart-
ment.
G031978
Folding the grid up/down
Grasp the lowering edge of the grid and pull it
rearward/upward, or push it downward/forward.
NOTE
If the steel grid is to be used with the optional
cargo area cover, the grid must be folded
down before the cargo area cover is put in
place.
Installing the steel cargo grid
For information about the necessary tools and
procedures for installing/removing the steel
cargo grid, please refer to the assembly instruc-
tions
1
that were included when the grid was pur-
chased.
Related information
•
Cargo area cover (p. 149)
1
Assembly instruction no. 30715972.
Loading ...
Loading ...
Loading ...