Loading ...
Loading ...
Loading ...
en Operating the appliance
26
1 Operating the
appliance
Operati ng the appliance
Preparing the washer dryer
The washer dryer was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean
Û programme.
Before washing/drying for the first time
~ Page 18
Note:
■ Never switch on a damaged washer
dryer!
■ Inform your customer
service!~ Page 46
1. Insert mains plug.
2. Turn the tap on.
Due to the use of the water
condensation technology for drying,
please keep the connected water
tap open during the drying process,
otherwise proper drying cannot be
guaranteed.
3. Open the door.
Selecting the programme/
Switching on the appliance
Note:
If you have activated the childproof lock,
you must deactivate it before you can
set a programme.
■ Select the required programme with
the programme selector. Can be
rotated in either direction.
The washer dryer is switched on.
The following figures are indicated
continuously on the display panel for
the selected programme:
■ the programme duration,
■ the preset temperature,
■ the maximum load (if the door is
open),
■ ...
Adjusting the washing
programme
You can use the displayed default
settings or adjust the selected
programme optimally to the laundry
items by changing the default settings
or selecting additional functions. The
selectable settings and additional
functions depend on the selected
washing/drying programme.
Overview of programmes~ Page 32
Loading ...
Loading ...
Loading ...