Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
33
ArtNo.320-0020 Oven back fixing screws
Fig.9-5
Remove the screws securing the electric cover to the
back sheet, and then remove cover and disconnect the
terminals from the rear.
Fit the new elements and reassemble in the reverse
order. Check the operation of the grill.
5 Ovens
5.1 To Replace a Thermostat
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel and hotplate (see 1.1 & 2.1).
Open the oven door and remove the oven furniture.
For the right-hand oven, remove the thermostat phial
cover (two screws). Unclip the thermostat phial from
the clips in the oven back. For the left-hand oven, pull
cooker forward to gain access to the cover box at the
rear of the cooker. Remove the four screws securing the
cover and lift clear.
Feed the thermostat capillary out of the oven.
Disconnect the wiring from the thermostat. Remove
two screws holding thermostat to mounting panel. Fit
new thermostat and reassemble in the reverse order.
Make sure that the phial is clipped to the oven back
with the phial centrally positioned between the clips.
Check the operation of the thermostat.
5.2 To Remove the Right-hand Oven Inner Back
Open the right-hand oven door. Remove the screws and
washers securing the inner back to the back of the oven
(Fig.9-5).
Carefully lift away the inner back.
Reassemble in reverse order, making sure that you fully
tighten the 4 screws and washers.
5.3 To Change the Fan in the Right-hand Oven
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the rear.
Remove the screws securing the electric cover to the
back sheet and remove the cover. Disconnect the three
terminals connected to the fan, noting their position.
Remove the oven inner back (see 5.2). Hold the fan
blade and remove the centre nut (left-hand thread), two
brass washers, fan blade and circlip. Unscrew the fan
retaining nuts and washers (three o each) and lift the
fan away from the rear of the cooker.
Fit the new fan and reassemble in the reverse order.
Check the operation of the oven.
5.4 To Remove an Oven Element Thermal Cut-out
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forwards to gain access to the cover
box. Undo the cover screws and lift clear. The cut-out
is located on the earth plate beside the oven element
connections. Disconnect the cut-out wiring. Undo the
xings that secure the cut-out to the earth plate and
remove.
Loading ...
Loading ...
Loading ...