Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
24
Levelling
You are recommended to use a spirit level on a shelf in one of
the ovens to check for level.
Place the cooker in its intended position taking care not to
twist it within the gap between the kitchen units as damage
may occur to the cooker or the units.
The front feet and rear rollers can be adjusted to level the
cooker.
To adjust the height of the rear of the cooker use a 13 mm
spanner or socket wrench to turn the adjusting nuts at the
front bottom corners of the cooker.
To set the front, turn the feet bases to raise or lower.
Fitting the Handles and Handrail
(Classic only)
Remove the 4 mm Allen screws from the doors (Fig.7-9). Fit
the door handles and secure using the 4 mm screws.
The handles should be above the xings.
Fit the plastic blanking plugs to the xing holes (Fig.7-10).
Remove the 4 mm Allen screws from the top corners of the
fascia (Fig.7-11). Fit the handrail in position and secure using
the 4 mm screws.
ArtNo.210-0006 - Classic fitting the handles 2
Fig.7-10
ArtNo.215-0026 - Handle gaskets fixed
Fig.7-9
Art No 215-0028 - Handrail fascia fixings
Fig.7-11
Loading ...
Loading ...
Loading ...