Loading ...
Loading ...
Loading ...
6. Install the previously removed screw (step 4, page
10) and tighten all screws.
6
Screw
I
H
B
EE
H
B
EE
4
10 11
FINAL INSTALLATION
7. Loosen two preassembled screws from light
kit pan (I). Remove and save remaining
preassembled screw.
8. Connect the male plug from the fan to female plug
from the light kit (J). Align two keyslots on the light
kit (J) with the two screws on the light kit pan (I).
Rotate the light kit (J) until it locks.
FINAL INSTALLATION
5. Pull the 9-pin connector from fan motor assembly
(H) through center hole of light kit pan (I). Align two
keyslots on light kit pan (I) with two screws on black
bracket below fan motor assembly (H). Rotate the
light kit pan (I) clockwise until it locks.
4. Loosen two preassembled screws from the tter
plate. Remove and save remaining preassembled
screw.
7
8
Keyslots
Black
bracket
H
I
9
9. Install previously removed screw (step 7, page 11) and
securely tighten all screws.
J
I
Screw
5
Screw
(remove)
I
Screws
(loosen)
Screw
(remove)
Fitter
Plate
Screws
(loosen)
Page 12
Loading ...
Loading ...
Loading ...