Loading ...
Loading ...
Loading ...
20
LIGHTS DISPLAYED POSSIBLE CAUSE REMEDY
FLASHING
FLASHING
The grinding is too ne and the coee is
delivered too slowly or not at all
Repeat coee delivery and turn the grinding
adjustment dial (A5 - g. 8) one click clockwise
towards "7" while the coee grinder is in oper-
ation. If after making at least 2 coees delivery
is still too slow, repeat the correction procedure,
turning the grinding adjustment dial another
click until delivery is correct (see section “13.1
Adjusting the coee grinder”r”). If the problem
persists, make sure the water tank (A17) is fully
inserted, turn the steam/hot water dial (A23) to
the I position and deliver a little water until the
ow is regular.
If the water softener lter (C4) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Deliver a little water by turning the steam/hot
water dial (A23) to the I position until the ow
is regular.
FLASHING
FLASHING
The pre-ground coee used is too ne
and the coee is delivered too slowly or
not at all
Repeat coee delivery using less pre-ground
coee, or a dierent type. If the problem per-
sists, make sure the water tank (A17) is fully
inserted, turn the steam/hot water dial (A23) to
the I position and deliver a little water until the
ow is regular.
If the water softener lter (C4) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Deliver a little water by turning the steam/hot
water dial (A23) to the I position until the ow
is regular.
FLASHING
+ OK
ON STEADILY
A LONG coee with pre-ground coee
has been requested
Put one level measure (C2) of pre-ground cof-
fee into the pre-ground coee funnel (A4) and
press
OK (B15) to continue and complete
preparation.
ON STEADILY
FLASHING
Too much coee has been used
Select a lighter taste by pressing
(B8) or
reduce the quantity of pre-ground coee.
The TrueBrew Over Ice™ button
have been pressed without selection the
aroma
Select the strength and then press the True-
Brew Over Ice™ button.
Loading ...
Loading ...