Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
53
2
The water connection of the appli-
ance is ready for connection at the
rear of the appliance.
Install the water hose onto the wa-
ter connection at the rear of the
appliance. Ensure that the connec-
tions are tight and leak-proof.
7/16"
2
Connect the water hose to the
shut-off valve.
Ensure that it is properly screwed into
position.
Slowly open the shut-off valve in the
water supply line and check the
whole water system for leaks.
The appliance can now be installed in
the niche (see “Installation”).
The appliance can now be connected
to the power supply (see “Electrical
connection”).
Electrical connection
Risk of electric shock!
The appliance must only be switched
on when it has been installed in ac-
cordance with the installation in-
structions.
Ground the appliance.
The appliance must not be grounded
via a gas pipe.
If in doubt, have a suitably qualified
and experienced electrician check
that the installation complies with rel-
evant regulations.
Do not install a fuse into neutral cur-
rent or grounding electrical circuit.
Do not use extension cords or un-
grounded (two prong) adapters.
Do not use a frayed or damaged
power cord.
Risk of electric shock!
For protection against electric shock,
this appliance is equipped with a
pole-free plug which is protected
against reverse polarity. The electri-
cal outlet must be properly
grounded.
Do not remove the round grounding
connector pin from the plug.
Use only a grounded plug adapter.
Loading ...
Loading ...
Loading ...