Loading ...
Loading ...
Loading ...
Cleaning and care
117
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dusting
brush, for example).
Replacing the Active AirClean
filters
The Active AirClean filters in the refrig-
erator section need to be replaced ap-
prox. every 6months.
Change Active AirClean Filter will appear
on the display.
Confirm the message with OK.
To remove the holder for the Active
AirClean filters, press against the re-
tainers on both sides of the holder
from the rear and pull the holder
downwards diagonally from the
frame.
Remove the used Active AirClean fil-
ters and place the new Active Air-
Clean filters with the surrounding
edge pointing downwards in the
holder.
To replace the holder, press against
the retainers on both sides of the
holder from the rear and clamp it into
the gap on the frame from below.
The holder can be fixed under any
shelf in the refrigerator section.
Once the Active AirClean filters have
been replaced, the Active AirClean filter
display must be reset using Settings
mode on the display (see “Selecting
additional settings – Resetting the Dis-
play Active AirClean Filter”).
New Active AirClean filters (both with
and without a holder) can be obtained
from Miele Technical Service, your lo-
cal dealer, or via the Miele website.
After cleaning
Replace all shelves and accessories
in the Fridge Zone.
Reconnect to the power supply and
switch the appliance back on.
Loading ...
Loading ...
Loading ...