Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
52
Connection to the water supply must
comply with the applicable regula-
tions in the country where the appli-
ance is being installed. All appliances
and systems used to supply water to
the refrigeration appliance must also
comply with the applicable regula-
tions in the respective country.
The appliance is only suitable for
connection to a cold water line,
which
– is directly connected to the water
supply in order to ensure that water is
circulated in the cold water line.
Avoid connection to a water supply
in which the water might stagnate.
This can affect the taste of water and
ice cubes.
– withstands the operating pressure.
– fulfills the hygiene regulations.
The water pressure must be between
29 and 116 psi (2 and 8bar).
A shut-off valve must be provided be-
tween the water line and the water sup-
ply of the building to ensure that the
water supply can be cut off if neces-
sary.
Make sure that the shut-off valve is
still accessible after the appliance
has been installed.
Risk of damage!
If the water intake is blocked while
the Ice Maker is still in use, the water
intake pipe can freeze up.
Turn the Ice Maker off if the water in-
take is interrupted (e.g., while on va-
cation).
Unduly high water pressure in the
system can result in damage to the
appliance.
Install a pressure reducing valve if
the water pressure in the system ex-
ceeds 116 psi (8bar).
Do not install the system if the water
pressure exceeds 120 psi (8.3bar).
Contact your plumbing specialist if
you are unsure of your water pres-
sure.
Installing the water hose to the appli-
ance
Before establishing the plumbed-wa-
ter connection, ensure that the appli-
ance is disconnected from the power
supply.
When installing the water hose, make
sure that it is neither kinked nor dam-
aged.
By this time, the installation niche
should already have been prepared so
that the appliance needs only to be
pushed into it.
Position the appliance slightly in front
of the installation niche so that the
shut-off valve can still be accessed.
Loading ...
Loading ...
Loading ...