Loading ...
Loading ...
Loading ...
If and when 223
Safety First Operating Instructions Practical Tips Technical Specifications
– First fit the turn signal in the opening in the chassis, fastening the
tabs ⇒ page 222, fig. 149, and then fit in the bulb as shown
by the arrow ⇒ page 222, fig. 149.
Number plate light
– Insert the flat part of a screwdriver into the special slot and
remove the bulb.
– Remove the bulb holder, by turning it until it is free.
– Change the bulb.
– Replace the bulb holder, by turning it until it fits fully.
– Fit the light into the space and press until you hear a “click”.
Interior light and front reading light
To remove the glass
– Insert a fine screwdriver between the casing and the glass
⇒ fig. 150.
– Carefully remove the glass, levering it to avoid possible damage.
To replace the bulbs
– Pull the bulbs outwards.
– To remove the central bulb, hold and press to one side.
Assembly
– Proceed in the reverse order, pressing gently on the outer edge
of the side light.
A
1
A
2
Fig. 150 Front reading
light
Ibiza_EN.book Seite 223 Mittwoch, 1. September 2010 5:24 17
Loading ...
Loading ...
Loading ...