Loading ...
Loading ...
Loading ...
Driving134
operation cannot be performed, risk of accidents and serious injury may
exist.
• The steering lock can be immediately blocked once the key is removed
from the ignition. The steering wheel cannot be turned. Risk of accident.
Caution
When the engine has been running under a heavy load for a long period, heat
can accumulate in the engine compartment and cause engine damage. For
this reason, you should idle the engine for approx. 2 minutes before you
switch it off.
Start-Stop function*
Description and operation
The Start-Stop function stops the engine when the vehicle is
stopped and starts it automatically when required.
– When the vehicle is stopped, put it in neutral and release the
clutch pedal. The engine will stop.
– When the clutch pedal is pressed, the engine starts again.
– The instrument panel screen displays information about the
status of the Start-Stop function ⇒ page 136, fig. 98.
Start-Stop function conditions
• The driver seat belt must be buckled.
• The engine hood must be closed.
• The engine must be at operating temperature
• The steering wheel must be straight.
• The vehicle must be on flat ground.
• The vehicle must not be in reverse.
• A trailer must not be connected.
• The temperature of the passenger compartment must be within the
convenience limits ( button should be selected).
• The windscreen de-mist function must be off.
• If in an increase in airflow is not requested.
• The temperature must not be set to HI or LO.
• The driver door must be closed.
• The diesel particulate filter must not be in regeneration mode, for diesel
engines.
• The battery charge must not be low for the next start.
• The battery temperature must be between -1 °C and 55 °C.
Start-Stop function interruption
In the following situations, the Start-Stop function will be interrupted and the
engine will automatically start:
• The vehicle starts moving.
• The brake pedal is pressed several times in a row.
• The battery has been discharged excessively.
• The Start-Stop System is manually deactivated.
• The windscreen de-mist function is turned on.
• The temperature of the passenger compartment exceeds the convenience
limits ( button).
• If the airflow is increased by more than 3 presses.
• Temperature setting HI or LO is selected.
WARNING (continued)
AC
AC
Ibiza_EN.book Seite 134 Mittwoch, 1. September 2010 5:24 17
Loading ...
Loading ...
Loading ...