Loading ...
Loading ...
Loading ...
Maintenance
927
1. Open the liftgate.
2. Remove the service cover.
3.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
6. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
7. Install the service cover by putting
it into the service hole.
* If your vehicle is equipped with LED
type stop and tail lamps replace
with LED assembled units. Please
contact an authorized Kia dealer.
High mounted stop lamp
replacement
1. Open the tailgate.
2. Gently remove the center cover of
the rear tailgate trim.
3. Disconnect the electrical connec-
tor.
4. Loosen the retaining nuts and
remove the spoiler.
OUM074056L
ODMEMC2019
OUMA074232
UM USA 7.qxp 3/6/2017 1:46 PM Page 92
Loading ...
Loading ...
Loading ...