Loading ...
Loading ...
Loading ...
Unlocking and locking78
close the vehicle, press the close button briefly ⇒ fig. 48 . The indica-
tors flash once.
By pressing the locking button twice ⇒ page 77, fig. 48 both the
locking security mechanism (double) and the volumetric alarm* are deacti-
vated but the perimetric alarm* remains active and this is indicated by the
indicator light on the driver'
s door.
Selective unlocking*
When the button ⇒ page 77, fig. 48 is used the driver's door is
unlocked, all others remain locked.
Press the button ⇒ page 77, fig. 48 twice to unlock all doors.
WARNING
• Incorrect use of the key can result in critical injuries.
• Never leave children or disabled persons in the vehicle; in case of emer-
gency they may not be able to leave the vehicle or look after themselves.
• Never leave any of the vehicle keys in the vehicle. This could result in
serious injuries, accidents or the theft of your vehicle. Always take the key
with you when you leave the vehicle.
• Unsupervised use of a key could mean that the engine is started or that
electrical equipment is used (e.g. electric windows). Risk of accident. The
vehicle can be locked using the remote control key. This could result in
people being trapped in the vehicle in an emergency.
Note
• The radio-frequency remote control can also be programmed so that only
the driver's door is unlocked the first time that the unlocking button on the
radio frequency remote control key is pressed. When the button is pressed
once more, all doors and the tailgate will be unlocked.
• The remote control functions only when you are in range ⇒ page 77,
fig. 49 (red area).
• If the vehicle is unlocked using the button, the vehicle will be
locked again automatically if any of the doors or the tailgate are not opened
within 30 seconds of unlocking the vehicle. This function prevents the vehicle
from remaining unlocked if the unlocking button is pressed by mistake.
• If the vehicle cannot be opened and closed using the remote control, the
remote control key will have to be re-synchronised ⇒ page 78.
Changing the battery
If the battery indicator does not flash when the buttons are pushed, the
battery must be replaced.
Caution
Use of inappropriate batteries may damage the radio frequency remote
control. For this reason, always replace the dead battery with another of the
same size and power.
For the sake of the environment
The flat batteries must be disposed of in accordance with regulations
governing the protection of the environment.
Synchronising the remote control key
Synchronising the remote control key
– Use both keys that have been delivered with the vehicle; the key
with the remote and the normal key ⇒ page 77,
fig. 48 ⇒ page 77
, fig. 49.
A
2
A
2
A
1
A
1
A
1
ibiza_ingles Seite 78 Mittwoch, 5. Oktober 2005 5:17 17
Loading ...
Loading ...
Loading ...