Loading ...
Loading ...
Loading ...
Cockpit 53
Safety First Operating instructions Tips and Maintenance Technical Data
Rev counter
The rev. counter displays the engine speed in revolutions per
minute.
The start of the red zone on the dial ⇒ page 52, fig. 32 indicates the
maximum engine speed which may be used briefly when the engine is warm
and after it has been run in properly. However, it is advisable to change up a
gear or move the selector lever to D (or lift your foot off the accelerator) before
the needle reaches the red zone.
Caution
The rev counter needle must never enter the red zone on the scale. Risk of
engine damage.
For the sake of the environment
Changing up a gear early will help you to save fuel and minimise engine
noise.
Engine coolant temperature display
This gauge shows the engine coolant temperature.
Needle in cold zone
Avoid high engine speeds and heavy engine loads ⇒ fig. 33.
Needle in normal zone
In normal driving conditions, the needle should be in the middle section of
the scale. The temperature may also rise when the engine is working hard,
especially at high outside temperatures. This is no cause for concern, as long
as the warning lamp does not light up on the instrument panel.
Needle in warning zone
The warning lamp* ⇒ page 60, fig. 40 will light up and a buzzer will be
heard if the needle is in the warning zone. Stop the car and switch off the
engine. Check the coolant level ⇒ page 176 ⇒ .
Even if the coolant level is correct do not continue driving. You should obtain
technical assistance.
A
4
Fig. 33 Engine coolant
temperature
A
A
A
B
A
C
A
C
A
2
ibiza_ingles Seite 53 Mittwoch, 5. Oktober 2005 5:17 17
Loading ...
Loading ...
Loading ...