Loading ...
Loading ...
Loading ...
If and when212
– Remove the plastic cover ⇒ page 211, fig. 153 and the
plastic caps ⇒ page 211, fig. 153 carefully levering using a
screwdriver using the flat part of a screwdriver; avoid damage to
the paintwork.
– Extract the bolts ⇒ page 211, fig. 154 and unplug the
connector.
– Remove the light from its housing.
Rear lights on the tailgate: Access to the bulb
Side light 1/ Fog light/ reverse light
– Unscrew the bolts ⇒ fig. 156 and remove the lampholder.
– Press and rotate the large lampholder to the left. In the case of a
small lamp, rotate and extract the lampholder and pull on the
lamp.
– Remove lamp and replace.
– Fit the lampholder and proceed with installation.
– Fit the caps and the plastic cover ⇒ fig. 155.
Note
Ensure that all joints and rubber elements as well as the plastic caps are
correctly fitted during installation.
A
A
A
B
A
C
Fig. 155 Rear light on
tailgate
Fig. 156 Access to the
lamp
A
D
A
B
A
A
A
B
ibiza_ingles Seite 212 Mittwoch, 5. Oktober 2005 5:17 17
Loading ...
Loading ...
Loading ...