Loading ...
Loading ...
Loading ...
If and when 213
Safety First Operating instructions Tips and Maintenance Technical Data
Rear lights on frame
Side light 2/ Brake light/ Indicator light
– Open the tailgate.
– Unscrew the bolts ⇒ fig. 157 with the flat part of the screw-
driver.
– Move the light unit outwards and pull.
– If necessary, unplug the connector.
– Unscrew the bolt ⇒ fig. 158.
– Take out the lampholder.
– Press and rotate the lamps to the left.
– Extract the faulty lamp and replace it.
– Proceed in the reverse order for fitting, pressing gently on the
outer edge of the light unit (area of the metal clips).
Note
Make sure that when assembling all seals and rubbers are correctly fitted.
Number plate light
– Release transparent lamp cover by levering the tab with the flat
part of a screwdriver.
– Remove the defective lamp from the lamp holder, holding it in
the centre, press to one side and fit new lamp
– Fit lamp cover in its space, taking special care when replacing the
rubber seal and press until it clicks into place.
Fig. 157 Rear lights on
the bodywork
Fig. 158 Rear lights on
the bodywork
A
F
A
G
ibiza_ingles Seite 213 Mittwoch, 5. Oktober 2005 5:17 17
Loading ...
Loading ...
Loading ...