Loading ...
Loading ...
Loading ...
253
[ER21900(FM)04/96]
one third page art:0020262-C
Attaching jumper cables
*
[ER22000(FM)02/96]
Jump-Starting
*
[ER22100(FM)02/96]
1. Make sure that the jumper cables are not in
the way of moving engine parts, then start
the booster vehicle. Run the engine at a
moderate speed.
*
[ER22200(FM)02/96]
2. Let the discharged battery charge for a few
minutes and then start the disabled vehicle.
It may take a couple of tries before the
vehicle starts. If the vehicle does not start
after several attempts, there may be a
different problem.
*
[ER22300(FM)02/96]
3. When both vehicles are running, let them
idle for a few minutes to charge the
discharged battery.
%
*
[ER22400(FM)02/96]
Removing jumper cables
*
[ER22500(FM)02/96]
1. Always remove the jumper cables in the
reverse order. Remove the negative (S) end
of the jumper cable from the metallic surface
on the engine or frame of the disabled
vehicle.
*
[ER22600(FM)03/96]
2. Remove the negative (S) cable from the
booster battery.
File:10lterf.ex
Update:Tue May 28 08:49:52 1996
Loading ...
Loading ...
Loading ...