User Manual - Page 111

For F-250 HEAVY DUTY 1997.

Loading ...
Loading ...
Loading ...
111
[SS13750(F )05/96]
How to cancel the Automatic Locking
Mode:
[SS13775(F )05/96]
Disconnect the combination lap and shoulder
belt and allow it to completely retract to cancel
the Automatic Locking Mode and be in the
Vehicle Sensitive (Emergency) Mode.
[SS13800(F )01/96]
NOTE: When the combination lap/shoulder
belt is unbuckled and allowed to
retract completely, the retractor will
switch back to the vehicle sensitive
(emergency) locking mode. See the
detailed instructions under Safety Seats
for Children in this chapter.
%
*
[SS14350(F )02/96] Combination Lap and Shoulder
Belts
[SS14400(F )04/96]
While your vehicle is in motion, the combination
lap and shoulder belt adjusts to your movement.
However, if you brake hard, corner hard or if
your truck receives an impact of 5 mph
(8 km/h) or more, the combination lap/shoulder
belt locks and helps reduce your forward
movement. The front seat belt systems can also
be made to lock by jerking on the shoulder belt.
[SS14450(F )04/96]
NOTE: The rear belts cannot be made to lock
up by jerking on shoulder belt.
*
[SS14500(F )01/96]
After you get into your vehicle, close the door
and lock it. Then adjust the seat to the position
that suits you best.
[SS14600(F )01/96]
To fasten the belt
*
[SS14700(F )02/96]
Pull the combination lap/shoulder belt from the
retractor so that the shoulder portion of the belt
crosses your shoulder and chest. Be sure the belt
is not twisted. If it is, remove the twist. Insert
File:06ltssf.ex
Update:Tue May 28 08:44:33 1996
Loading ...
Loading ...
Loading ...