Loading ...
Loading ...
Loading ...
Frequently asked questions
97
The following faults can be corrected without contacting the Miele Service Depart‐
ment.
If in doubt, please contact Miele.
Risk of injur
y! Improperly performed installation, maintenance or repair
work can pose a serious danger to users of the appliance.
Installation, maintenance and repairs may only be carried out by Miele author‐
ized technicians.
Do not attempt to open the housing.
Problem Possible cause and solution
You cannot turn the ap‐
pliance on.
The circuit breaker has tripped.
Rese
t the circuit breaker (see data plate for the
correct fuse rating).
There may be a technical fault.
Discon
nect the appliance from the power supply
for approx. 1 minute:
– tripping the relevant circuit breaker or screwing
the fuse out complet
ely, or
– tripping the ground fault circuit interrupter
(GFCI).
If
the steam oven still will not turn on, contact a
qualified electrician or Miele Service.
The steam oven does
not heat up.
Demonstration mode is active
Deac
tivate Demo mode (see "Settings – Show‐
room Program").
The fan can still be
hear
d after the appli‐
ance has been turned
off.
The fan is still running.
The appliance
is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will turn itself off automatically after a while.
A humming sound can
be
heard after switch‐
ing on the appliance,
during operation and af‐
ter turning off the appli‐
ance.
This is not a fault. It is made by water being pumped
thr
ough the system.
Loading ...
Loading ...
Loading ...