Loading ...
Loading ...
Loading ...
3
1
Getting started
1
GETTING STARTED
This chapter provides basic information for using the copier.
INTRODUCTION
This copier has been designed to provide intuitive operating ease while requiring a minimum
amount of space. To get full use of all copier features, be sure to familiarize yourself with this
manual and the copier.
For quick reference during copier use, keep this manual in a handy location.
●
The AL-1250 can be used as a laser printer. The AL-1020/AL-1220 /AL-1521
can also be used as a laser printer if an optional printer upgrade kit is installed.
This manual describes only the copier features. For description of the printer
features, see the printer manual.
●
The AL-1020 and AL-1220 are equipped with one paper tray while the AL-
1250 and AL-1521 are equipped with two paper trays. The illustrations in this
manual are mainly for the AL-1020 and AL-1220.
Conventions used in this manual
In this manual, the following icons are used to provide the user with information pertinent to the
use of the copier.
Warns the user that injury to the user or damage to the copier may result if the
contents of the warning are not properly followed.
Cautions the user that damage to the copier or one of its components may
result if the contents of the caution are not properly followed.
Notes provide information relevant to the copier regarding specifications,
functions, performance, operation and such, that may be useful to the user.
Indicates a letter displayed in the display.
CAUTIONS
Follow the cautions below when using this copier.
●
The fusing area is hot. Exercise care in this area when removing misfed
paper.
●
Do not look directly at the light source. Doing so may damage your eyes.
●
Do not switch the copier rapidly on and off. After turning the copier off, wait
10 to 15 seconds before turning it back on.
●
Copier power must be turned off before installing any supplies.
Loading ...
Loading ...
Loading ...